Computer Cables / Connectors / Adapters ROLINE Adapter, mSATA SSD to 2.5 SATA 22pin Best Solution that convert and easily retain mSATA SSD as normally standard 2.5 SATA SSD • Convert Full Size mSATA SSD to 2.5 Form Factor • Supports up to SATA 6Gb/s • Compatible with 2.5 SATA drive mechanical specifications • 22 pin SATA (signals and power) male connector on board • Transparent to the operating system and no driver required • Latch mSATA connector on board, a screw to fix the mSATA module isn‘t neccessary • Contents: adapter, 2.5 drive metal frame (with 8 mounting holes and 4 HDD screws), manual Order-No. – P.U. ROLINE Adapter, mSATA SSD to 2.5 SATA 22pin 11.03.1567 – 10 ROLINE External SATA 6.0 Gbit/s Cables ROLINE high quality HDD cables for the connection of an external SATA hard disk. • Support data transfer rates of up to 6.0 Gbit/s (SATA III) • Compatible with SATA 3.0 Gbit/s (SATA II), SATA 1.5 Gbit/s (SATA I) • 4-pin cable with ground wires • Connectors: 2x external 7-pin SATA 3.0 Gbit/s Order-No. – P.U. ROLINE External SATA 6.0 Gbit/s Cable, 0.5 m 11.03.1548 – 50 ROLINE External SATA 6.0 Gbit/s Cable, 1.0 m 11.03.1549 – 50 ROLINE M.2 to SATA III SSD H/W adapter, 2x M.2 NGFF SSD, bootable and RAID-capable 2.5-inch H/W adapter for the installation of two M. 2 SSDs (NGFF), bootable and RAID-compatible and with 6Gbit/s SATA connection! • Supports two M. 2 NGFF SSDs with form factor 2230, 2242, 2260 and 2280 • M.2 NGFF SATA SSDs can be primary boot device and contain operating system and applications. • RAID 0 and RAID 1 configurable via hardware or software; configuration on the hardware side via 6 pins with jumper (jumper table on the back of the board) • The 2.5 inch H/W adapter can be installed in a 2.5“ housing and is therefore perfectly suited for mobile use. • No drivers required • Contents: HDD adapter Order-No. – P.U. ROLINE M.2 to SATA III SSD H/W adapter, 2x M.2 NGFF SSD, bootable and RAID-capable 16.01.4145 – 10 ROLINE Internal SATA 6.0 Gbit/s Cables, angled, with Latch Utilizing the SATA III specification and with it‘s unique locking latch, you can rest assured your system is safe and secure. • Connect your high-speed Serial ATA device (e. g. HDD) to a Serial ATA Controller • Support data transfer rates of up to 6.0 Gbit/s • Compatible with SATA 1.5 Gbit/s (SATA I) and 3.0 Gbit/s (SATA II) • Cable with latch on both connectors • Cable with connector angled to one side, with pull for easy removal • Narrow cable design to increase internal air flow • 4-pin cable with ground wires • Connectors: 2x internal 7-pin SATA Order-No. – P.U. ROLINE Internal SATA 6.0 Gbit/s Cable, angled, with Latch, 0.5 m 11.03.1564 – 25 ROLINE Internal SATA 6.0 Gbit/s Cable, angled, with Latch, 1.0 m 11.03.1565 – 25 3.59 3
RkJQdWJsaXNoZXIy MjY1OTI4